01 Free 3D printing cost and price estimator

3D Print Cost Calculator

Estimate the cost of a 3D print using filament weight, spool price, print time, electricity, machine and labor costs. See every charge and calculate a suggested selling price.

Free · No signup Cost inputs stay private Detailed cost breakdown Selling price estimate
3D Print Cost Calculator

Enter your print details

The numbers below are examples. Replace them with the filament weight and print time shown in your 3D-printing software.

Choose the currency you use for your prices. Switching currencies does not convert the numbers you've entered.

Filament

Enter the total weight shown after slicing, including supports and color-change waste if they are already counted.

Print time

Electricity

Use the average watts the printer draws during printing, not the maximum on its power supply.

Machine cost

Include a share of the printer's purchase cost and maintenance. Do not add those costs again elsewhere.

Labor

Other costs

Add extra waste only if it is not already included in the sliced filament weight.

Selling price

Gross margin is the percentage of your selling price left after the costs entered here. It is different from adding a percentage to cost. Fees, taxes and shipping are not included automatically.

02 Cost at a glance

How Much Does a 3D Print Cost?

The cost depends on how much filament you use, how long your printer runs and whether you need to include labor or equipment costs. For example, 100 g of filament from a $25 per kg spool costs $2.50 in material. That is not the whole printing cost.

Add power consumption, a machine cost allowance, preparation and finishing time, and packaging if applicable. In the sample calculation above, those expenses bring the estimated total to about $13.72. Replace every sample number with your own prices for a more useful estimate.

03 Simple workflow

How to Calculate 3D Printing Cost

  1. 01

    Enter filament and spool price

    Take the filament weight from your 3D-printing software (slicer), plus the price and filament weight shown on your spool.

  2. 02

    Add printing time and costs

    Enter the printing time, average power use and your electricity price. Add printer, labor and packaging costs if they apply.

  3. 03

    Review cost and selling price

    Review each cost, choose your target profit margin and copy a summary of the estimated price.

04 Materials

Filament Cost Calculator

Divide the spool price by the net filament weight to find the cost per gram. Then multiply by the grams used for the print. For a $25, 1,000 g spool, the material rate is $0.025 per gram.

Filament cost = (used grams + extra waste grams) × spool price ÷ spool weight. If your slicer already includes supports and purge, do not add that same waste twice.

05 Energy

3D Printer Electricity Cost

Use the printer's average running power and local electricity rate. The power supply's maximum rating is not a good substitute for actual power use.

Electricity cost = watts ÷ 1,000 × print hours × price per kWh. In the example, 120 W for 8 hours uses 0.96 kWh and costs approximately $0.17 at $0.18/kWh.

06 Cost breakdown

What Goes Into a 3D Printing Cost Estimate?

Each cost has a separate input so you can see exactly what contributes to the final number. Leave a cost at zero if it does not apply.

Types of 3D printing cost and how they are estimated
CostHow it is estimatedWhat to watch for
FilamentGrams used × price per gramInclude supports once
ElectricityAverage kW × print hours × electricity rateUse average watts
MachinePrint hours × machine cost per hourInclude printer wear and maintenance only once
Labor(Setup + finishing minutes) ÷ 60 × hourly rateCount only the time you spend working on the print
OtherPackaging and any other costs you enterAdd fees and shipping separately if selling

07 Machine expense

How to Estimate 3D Printer Cost per Hour

Printer price is not the cost of every print. Spread the equipment cost over the hours you expect to use it, then add a separate allowance for normal maintenance.

Machine cost per hour = (purchase price − estimated resale value) ÷ expected productive printing hours + maintenance per hour. This is a planning method, not a precise prediction of lifespan.

Illustrative 3D printer depreciation and maintenance estimate
AssumptionExampleWhy it matters
Printer purchase price$400What you paid for the machine
Estimated resale value$100Value you expect to recover at the end
Expected printing hours3,000 hoursHow many hours you expect to print over the machine's useful life
Printer purchase cost per hour($400 − $100) ÷ 3,000 = $0.10Share the printer's cost across its expected use
Maintenance allowance$0.05 per hourEstimated parts, wear and routine servicing
Enter as machine cost per hour$0.15 per hourDepreciation + maintenance

For an eight-hour print this example adds $1.20 in machine cost. Your actual utilization and repair spending may be different. The calculator starts with a separate example rate of $0.35/hour; change it if your own estimated rate is lower or higher. Do not count those same expenses again in Other costs.

08 For sellers

How Much to Charge for 3D Printing

Start with the estimated cost per print. Choose a target gross margin (the share of your selling price left after the costs entered here) to calculate a suggested price: selling price = total cost ÷ (1 − margin percentage ÷ 100). The result also shows the percentage added to your costs, called markup.

For example, a 30% margin is not the same as adding 30% to cost. If the total cost is $10, a 30% margin requires a selling price of about $14.29, while a 30% markup gives $13. For a real order, consider selling fees, taxes, shipping and possible failed prints that are not calculated automatically here.

09 Before quoting customers

Printing Costs vs Final Selling Price

The suggested price uses your entered cost and target gross margin. Two extra business risks—platform fees and failed jobs—can change the amount you ultimately keep.

Planning examples for selling fees and failed 3D prints
What changesExample calculationWhat to remember
Target 30% gross margin$13.7228 ÷ 0.70 = $19.60Price shown for the example inputs; selling fees and failures not included
10% selling fee on revenue$13.7228 ÷ (1 − 0.30 − 0.10) ≈ $22.87Assumes fee is exactly 10% of selling price; no fixed charges
10% failed full-cost attempts$13.7228 ÷ 0.90 ≈ $15.25 cost per successful jobAssumes 90% success and full cost on each unsuccessful attempt

The calculator does not add platform fees or failed-print costs automatically. The rows above help you plan a quote. A failed print may use only part of the material or time, and selling platforms may also charge fixed fees. Consider tax, shipping, customer communication and reprints when preparing a final quote.

10 Worked example

Example: Cost of a 100g PLA Print

These are the starting example values in the calculator, not typical prices or measurements for a particular printer.

Costs of an illustrative 100 g PLA print with an eight-hour print time
ItemExample calculationCost (USD)
Material100 g × $25 / 1000 g$2.50
Electricity0.120 kW × 8 h × $0.18 / kWh$0.17
Machine8 h × $0.35 / h$2.80
Labor30 min × $15 / h$7.50
PackagingEntered amount$0.75
Total costSum of the full cost amounts$13.72
Suggested selling priceTotal cost ÷ 0.70 (30% gross margin)$19.60

Electricity is $0.1728 in this example, displayed as $0.17. The total uses the full amount, so adding the rounded rows may differ slightly from the final cost.

11 Use your slicer

Where to Find Filament Weight and Print Time

Slice the model with the same printer, material, infill and support settings you intend to use. Then copy the estimated weight and duration, rather than guessing from the STL file size.

Where to find material weight and printing time after slicing
SlicerWhat to doWhat to enter in the calculator
Bambu StudioImport the model, select your printer and filament, then use Slice plate and inspect the Preview estimatesEstimated total filament in grams and total print time; check whether purge or supports are included
PrusaSlicerSet printer and filament, use Slice now, and inspect the Used filament and Estimated printing time figuresFilament in grams and the estimated time, using the same sliced settings you plan to print
UltiMaker CuraSelect your printing profile, click Slice and read the displayed material and time estimate; switch to Preview to inspect the layersConvert any reported weight to grams and enter the estimated duration

Screen labels and estimates may look different depending on your slicer version and printer. For multicolor prints, check any extra filament used for supports, color changes or a purge tower. Do not add these twice if you already use a total that includes them.

Further reading: Bambu Studio, PrusaSlicer documentation and UltiMaker Cura guidance.

12 STL limitations

Can You Calculate Filament Weight from an STL?

An STL describes the outside geometry of a 3D model. For a closed solid, its volume and a chosen material density can help estimate a fully solid weight. That does not predict your print's actual infill, supports, purge, walls or print duration.

You cannot upload an STL to this calculator. Instead, enter the filament weight and print time estimated by your 3D-printing software. Need to inspect or repair the model first? Use the STL Viewer or STL Repair.

13 Filament weight

How to Convert Filament Length to Grams

When your slicer only shows filament length, you also need filament diameter and material density to estimate the weight.

Filament weight (g) = π × (diameter in mm ÷ 2)² × length in mm ÷ 1,000 × density in g/cm³. The formula assumes a circular filament with the stated diameter and density.

Illustrative filament length to weight conversion using PLA and 1.75 millimeter diameter
MeasurementValueExplanation
Filament diameter1.75 mmA common filament diameter; check your actual spool
PLA material density1.24 g/cm³Example based on Prusament PLA; other materials differ
Length from slicer10 m10,000 mm of filament
Estimated weight≈ 29.8 gAbout 2.98 g for each meter of this example filament

If your slicer already reports grams, use that number instead. Different manufacturers and formulations can have different densities. Refer to the Prusament PLA technical data sheet for your material rather than assuming all PLA or PETG weighs the same.

14 Avoid surprises

Common 3D Printing Cost Mistakes

Double-counting waste: if the sliced total already includes supports and purge, adding those grams again inflates material cost. Using maximum watts: the power-supply rating is not the printer's average consumption. Mixing print time with paid labor: automated machine hours are not always hands-on work hours.

Confusing margin with markup: a target 30% gross margin means profit is 30% of the sale price, not 30% of cost. Ignoring selling expenses: final customer quotes may need payment processing, marketplace fees, taxes, shipping and expected failure costs. Review these expenses separately before sending a final quote.

15 Related workflows

More 3D Printing Tools

Check, repair, resize and convert your model before calculating the cost of printing it.

16 Common questions

3D Print Cost Calculator FAQ

How much does it cost to 3D print 100 grams?+

Material alone costs $2.50 when 100 g is used from a $25, 1 kg filament spool. Add electricity, printer use, labor, packaging and other applicable expenses to estimate the complete cost. With the other example expenses included, the estimated total is about $13.72.

How do I calculate 3D printing filament cost per gram?+

Divide the spool price by its net filament weight in grams. A $25 spool containing 1,000 g costs $0.025 per gram, so 100 g costs $2.50. Count extra waste only if it was not already included in your slicer's estimated weight.

How much electricity does a 3D printer use?+

Use estimated average running wattage, not the maximum printed on a power supply. Electricity cost equals average watts divided by 1,000, multiplied by print hours and your electricity price per kWh. At 120 W for eight hours and $0.18/kWh, the example cost is $0.1728.

How do I calculate 3D printing cost from Bambu Studio?+

Slice your model in Bambu Studio, use the estimated total filament weight and printing time, then enter those figures in this calculator. Add your real spool cost, electricity rate and any optional charges. Check that supports and purge are not counted twice.

Does the filament weight include supports?+

It depends on the number you copied from your slicer. Use its total material estimate where possible, including supports or purge if that estimate contains them. Extra Filament Waste is only for waste that is not already included.

How much should I charge for a 3D print?+

Start with your full estimated per-print cost, including material, electricity, machine time, labor and other expenses. For a 30% target gross margin, divide the cost by 0.70. For example, a $13.72 cost produces a suggested selling price of about $19.60 before selling fees, tax and shipping.

What is the difference between markup and profit margin?+

Markup is the profit divided by cost; gross margin is the profit divided by selling price. A 30% margin on $10 of cost requires a price of about $14.29. Adding a 30% markup to $10 gives only $13, so these are not the same pricing method.

Can an STL file tell me the exact print cost?+

No. An STL mainly stores the model's surface. It does not reliably provide sliced filament weight, print duration, infill, supports or purge. Use estimates from your slicer for a more useful cost calculation.

Is this 3D print cost calculator free?+

Yes. It runs in your browser without signup. Your cost inputs are calculated locally; the tool does not send the values to our servers.

Can I estimate multiple prints?+

This calculator estimates one print at a time. For a batch, multiply the cost per print by the quantity, then account for any shared setup time or differences in failure rates separately. For multiple prints, calculate any shared preparation costs separately.

Does the suggested price include Etsy fees, taxes or shipping?+

No. The estimated selling price uses your selected gross margin against the costs entered in this form. Platform fees, payment fees, tax and shipping are not calculated automatically, so include them when preparing a final customer quote.

Can I switch between USD, EUR, GBP and CNY?+

Yes. You can label your inputs and results with these currencies, but changing the currency does not convert your numbers. Enter all prices in the currency you select.

Where can I find filament weight and printing time in my slicer?+

Slice the model first. Look in Bambu Studio Preview for filament and time estimates; in PrusaSlicer, find Used filament and Estimated printing time in the sliced information; in Cura, check the material and time estimates after slicing. Use total weight in grams when available and check what waste the displayed figure includes.

How can I calculate an hourly 3D printer machine cost?+

Estimate the printer purchase cost minus its expected resale value, divide that difference by its expected productive printing hours, then add your maintenance allowance per hour. Enter that combined amount as Machine cost per print hour. Do not count the same depreciation or repairs again in Other costs.

How do I convert filament length in meters to grams?+

You need the filament diameter and material density. For 1.75 mm filament at 1.24 g per cubic centimeter, one meter weighs about 2.98 g. Ten meters therefore weighs about 29.8 g. Density varies by material and manufacturer; prefer the gram estimate directly from your slicer.

Does the suggested price account for failed prints?+

No. The estimate covers one printing attempt and does not automatically allow for failed prints. If prints fail, more materials, time or labor may be required. For a simple planning illustration, when every failed attempt would incur the full estimated cost and the success rate is 90%, divide the cost per attempt by 0.90 to estimate average cost per successful job.

Can I use one filament price for a multicolor print?+

Only if all used materials effectively cost the same per gram. If colors or materials have different prices, calculate each filament cost separately and add those material costs into your overall estimate. The calculator uses one spool price. For different materials, work out their costs separately and check your slicer for color-change waste.